Router tables allow woodworkers to make precise cuts with the router, cuts that would be almost impossible to make with a handheld model. The increased accuracy and precision that they offer and the convenience of use are what make the router tables mandatory for all workshops. But using the table for precise cuts isn’t an easy task, at least not for those who don’t know all the secrets behind using the router table. If you want to make accurate cuts with ease, read the following lines to find out the secrets of using a router table.
Use router bits for increased accuracy
When you have a router table, there’s no real need to attach a straightedge fence or an edge guide to the router to make an accurate cut. According to the RouterTable.reviews tests on safety in use of the most popular router tables, the safest, and probably the best way to accurately cut with the router table is by using router bits that are fitted with ball-bearing pilots. All the route table model reviews on the website provided increased accuracy in cuts while having router bits with ball-bearings attached. The bearing will ride along the edge of the workpiece, maintaining the bit on the course, and offering you full control over it. Just set the depth of the cut, and get ready to use the router.
Wax the router table to achieve a smooth glide
A secret that most woodworkers won’t share with beginners is that the router table must be waxed regularly. The router table becomes sticky fast, especially if it’s used often. After you wax it, the surface of the table becomes smooth, and the wood will glide easily over the bit when you use it. Make sure that you wax the table every time before you use it to ensure that the wood you want to route won’t get stuck, and to increase the accuracy of the cuts.
Wear rubber gloves when using the router table
Another secret of master woodworkers that use the router table for their projects is that they wear rubber gloves. Router tables are more dangerous than you would think, always existing the risk for your hands to slip into the bit because of the slick wood surface. The permanent slipping of your hands will make it nearly impossible to achieve accurate cuts, and your projects will have to suffer because of this. By wearing rubber gloves, you prevent this from happening because they stick to the wood, allowing you to hold the workpiece firmly in place for a precise cut.
Use a straightedge
For precision cuts, another tactic you can take up is to use a straightedge as a fence. The straightedge allows you to guide the board over the bit more accurately, without chipping or swerving it. First, take the right measurements, and then clamp the piece or lumber or plywood to the top of the table. This addition will ultimately change the way you work as the table will remind you of a table saw functionality-wise. Next, just turn on the router and use this improvised fence as guidance for making adjustments to the workpiece.
Listen to the router
Another secret of the trade is listening to your tools. When you hear a high-frequency sound or a chatter coming from the router, it ultimately means that precision is the last thing you are obtaining at that moment. If there is a chatter, it means the board is bouncing off the bit. In case a high-frequency noise is what you are dealing with, it shows that a tear has occurred along one of the board’s sides or underneath the workpiece. When these sounds do come up, stop your activity and remedy the cause of the problem before advancing.